| Home | Company Profile | Rentals | Specials | Training Centre | Tech Talk | Testimonials | Newsletters | Photo Gallery | Contact Us |
Tyre Changers
Car Tyre Changers
Truck Tyre Changers
Motorcycle Tyre Changers

Mobile Units

Wheel Balancers
Car Wheel Balancers
Truck Wheel Balancers

Wheel Aligners
3D Wheel Aligners
CCD Wheel Aligners
Truck aligners

Tyre Repair
Truck Tyre Repair

Other Tyre Equipment
Rim Repair Machine
OEM Approvals
Lifting Equipment
Hydraulic Pipe Bender
Aircon Unit
Nitrogen Tyre Inflator
Disk Skimmer
Diagnostic Equipment

Truck aligners

Equipment Africa > Truck aligners

AXIS 4000

The Wheel Alignement System AXIS4000 is a new and innovative development from HAWEKA. This top-of-line product is the result of many years of experience in mobile wheel years of experience in mobile wheel alignment.

This high-quality wheel alignment system enables a fast, precise and state-of-the-art measurment. The decisive factor that led to the further development of this measuring procedure has been the worldwide high requirment for wheel alignment together with the flexibility and accuracy of the measurement technology. The result is a measurement system that matches the standards of car wheel alignment inasmuch as easy handling and measurment accuracy are concerned. All this is offered at an unbeatable price.


  • Fast measurement of :
    • single and total toe
    • steering gear middle position
    • KPI, camber and toe-out on turns
    • maximum steering angle
    • caster and out of square of the axles.
  • Measurement takes place in the driving condition. There is no need to lift the truck.
  • Different magnetic feet enable a fast mounting on steel rims.
  • Our patented clamping device ProClamp with grapplers suits Aluminium rims.
  • Actual instantaneous data can be recorded thanks to the 360o rotatable measuring heads.
  • The adjustment takes place directly at the monitor.
  • The printout shows the measured data and the setting values before and after the process of measuring and adjusting.
  • The acquistion and recording of data takes places via radio transmission directly to the printout.


First the type of the vehicle to be measured can be chosen from the menu. Following this all relevant data can be easily selected. For example, the dimensions of the rim can be entered individually. Thus almost all types of commercial vehicles up to small transporters can be measured by AXIS4000.


The preparations needed to measure a vehicle are easily comprehensible thanks to a clear graphical display. It is NOT AT ALL REQUIRED to attach the scales to the frame.


The acquired data are available for the operator in digital as well as in analog form. This takes place in real time during the adjustment.


The operator is led through the well structured menu in order to execute the necessary steps in turn. Right after the data recording, all measured values belonging to each step will be displayed.

The measurment data per axle are displayed individually. This axle related illustration enables fast adjustment.


Depending on the type of axle all possible measurement procedures are displayed.

The measurement data per axle are displayed individually. This axle related illustration enables fat adjustment.

A stable wagon enables easy and secure storing of all AXIS4000 parts. The colset offers enough place for a printer as well.


Clear illustration of the measurment results of all axles in one printout.


A stable wagon enables easy and secure storing of all AXIS4000 parts. The colset offers enough place for a printer as well.

TA-20 laser system

Performance features

  • measured in drive position, no lifting necessary,
  • all vehicle types can be measured quickly and reliably with a measuring system,
  • electronic inclinometer with digital display,
  • easy fitting onto rims due to magnets
  • quick-clamping device for all alloy rims,
  • 360 rotating measuring head with battery/rechargeable batter LASER technology,
  • quick measuring of: partial toe, camber, toe-in angle, caster, axle inclination, axle offset and central positioning of the steering gear,
  • vehicle frame is included in each measurement,
  • all front axle measurements within 10 minutes including setup time,
  • good price-performance ratio guarantees quick amortization,
  • mobile equipment cabinet included in the scope of delivery.

Data sheet

New Product Release

M & B Exclusive Importers

Equipment Africa appointed as exclusive importers for the M&B Range of equipment. M&B was established on 3 February 2006 by Franco Magnani and Dido Boni. The founding partners began their professional experience in the automotive sector at a company in Correggio, leaders in the production of equipment for tyre specialists and car workshops, especially tire changers and wheel balancers. Franco Magnani started his technical-commercial experience in 1959 and Dido Boni exactly ten years later (1969). In January 1975, together with two other partners, they founded the company Sicam, remaining at the helm until August 2005 when they were bought out by Bosch and achieving success and recognition all over the world for their machines and equipment designed to solve the issues resulting from the constant evolution of tires and fitting them on rims. M&B was created to pass on all this experience and know-how to their heirs, who are, and will remain in the future, the supporting pillars of the new company.

Other Equipment Brands
Car Tyre Changers
Truck Tyre Changers
Car Wheel Balancers
Truck Wheel Balancers

Second Hand
Tyre Changers
Wheel Balancers
Wheel Aligners
Lifting Equipment
We Buy and Sell Equipment

Special Offers

Join our mailing list to receive

You will get notification of Special Offers we offer from time to time.

Web Design By Creative Web Design Hosted by CWD Internet Solutions E-mail Newsletters by CWD Bulk Mail Buisness Directory by adsXpress